While Shark vacuums are designed to not lose suction as they fill up, this is only true.

Here’s a DIY guide for how to replace a vacuum cleaner belt.. Knowing how to do basic vacuum repairs is a useful skill for saving money.And if there’s one repair job that everyone should know how to do, it’s replacing a vacuum drive belt..

In this article, we’ll go through a basic process for replacing a belt.While every vacuum is different, the steps in this article apply to most vacuum cleaners.. What is a Vacuum Belt?.Vacuum belts are rubber belts that drive the rotation of the brush roll.

A spinning brushroll agitates dust and dirt, which can then be collected by the vacuum’s suction.This makes the belt a critical component for ensuring that a vacuum runs smoothly and effective.. Over time, vacuum belts can break or become stretched.

This isn’t surprising, as some vacuum belts spin more than 100,000 times per minute!

When a belt becomes damaged, the brush roll won’t turn correctly, which prevents the vac from properly agitating carpet fibres..Make sure you leave the dust cup to try for at least 24 hours before reattaching it to the vacuum cleaner..

If you don’t want to give your dust cup a deep clean, use a soft brush to remove dust and hair that’s caught around the metal shroud inside the cup..We always recommend emptying bagless vacuum cleaners into an outdoor bin to ensure that dust doesn’t escape back into the house.

This is especially important if someone in your household suffers from allergies..Step 2: Clean the Shark’s Filters.